Are you a new bandsaw owner? Or interested to know how to use one? Then knowing the right bandsaw blade to use is very important. Knowing the right bandsaw blade will help you work efficiently, saving time and money during the process. Take a look at this guide we made to help you in choosing the blade to use.
This should be the first on your list when it comes to buying bandsaw blades. This information is available on the manual or specifications written on the instruction book of your bandsaw. If you haven’t seen it or lost your manual, you can contact us atwww.specialtysaws.com.au for more information.
The width of your blade is also important information when choosing the right blade. For us, we recommend that you choose the widest blade possible because it is stronger and can withstand greater pressure without flexing or being broken. If you are not sure, make sure to read the manual or consults theexperts in bandsaw blades.
If you are a woodturner, cutting bowl blanks with a bandsaw is effective and safe. However, you will need to choose the blade that has the right radius to cut the material.
Here’s a list of the minimum radius or curve for each blade width:
Blade width – Minimum radius
13mm (1/2″) – 63mm (2 1/2″)
10mm (3/8″) – 27mm (1 1/16″)
6mm (1/4″) – 19mm (3/4″)
5mm (3/16″) – 13mm (1/2″)
3mm (1/8″) – 10mm (3/8″)
Tooth Form & Pitch
The third factor you should consider because this will depend on what type of work you intended to do for example, rip cutting, cross cutting, etc. Generally a skip blade is used for cutting, whereas a regular or triangular tooth blade is for cross cutting.
Used for deep cutting especially rip cuts.
Good for general purpose use with a degree of cutting across the grain and with the grain.
This is the ideal all-purpose blade suitable for cutting up to 160mm and ripping sections up to 50mm thick.
Good for cutting plywood and non-ferrous metals and plastic. The finish is good when cutting natural timber. When cutting metal, reduce the speed as much as possible especially when cutting ferrous metals or cast iron.