Magnetic Drill Machines & Cutters

M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

The Holemaker MAX 450 is an example of a custom built magnetic base drilling machine, designed for a specific application. This particular job required a #4MT machine with a 450mm stroke, which the MAX 450 was designed around.

Please speak with ITM if you have a job which requires machine specifications that no machine on the market will offer.

The TAP50 is a new portable magnetic drilling machine with 200mm drilling and M52 tapping capacity (with optional tapping head) TAP50 has a 3.0 kW single phase 240V motor.The spindle bore is MT5. TAP50 is designed for special and challenging applications no other portable magnetic drill has been able to solve before.

The HMP200 is a heavy-duty pneumatic drilling machine with milling/cutting capacity up to 200mm diameter, 400mm depth and tapping capacity up to M48. This is a large, heavy duty magnetic drill for very special applications. It can be easily assembled, positioned and used by a single operator thanks to its modular construction.

Two permanent magnetic bases, two pneumatic motors and No. 5 Morse Taper spindle make this machine one of the most powerful portable magnetic drills on the market. Optional 1L pressure feed coolant bottle available.

The compressed-air motor used in the HMP200 drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion.

The HMP45 is a compact portable pneumatic powered drilling machine which allows hole cutting up to 45mm diameter and 52mm depth using Holemaker cutters. The #2 Morse Taper spindle allows a wide range of tooling to be used with the machine.

The combination of pneumatic drive and permanent magnetic base eliminate the need of electric power supply thus making this machine an ideal solution in many hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry.

The compressed-air motor used in the HMP45 drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion.

The HMP35AD is a small portable pneumatic drilling machine which allows holes to be drilled up to 35mm diameter in places with restricted space, using standard 3/4 Weldon shank cutters. This machine is the lowest height pneumatic magnetic drill currently available on the world market.

The combination of pneumatic drive and permanent magnetic base eliminate the need of electric power supply thus making this machine an ideal solution in many hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry.*12mm twist drill capacity using Weldon shank twist drill bits.

The compressed-air motor used in the HMP35AD drill iscertified ATEX II2G/D C IIC T6;T4 and meets therequirements for use in areas with a risk of explosion.

The Holemaker 40AD is a low profile angle drive machine providing a constant working height of 181mm. The Holemaker 40AD utilises standard 3/4" Shank Holemaker Cutters up to 40mm diameter and 25mm depth, ensuring a wide range of cutters are always available.

The feed handle can be easily changed to either side or removed for use with a socket wrench on the hex drive, and with the combination of a 181mm constant working height, this machines can work in areas most other cannot. This machine is ideal for working with truck chassis.

The remote pressure feed coolant system, supplies cutting fluid to the centre of the annular cutter even when the machine is positioned in vertical & horizontal positions.*12mm twist drill capacity using Weldon shank twist drill bits.

No. 3 Morse Taper Drilling Machine Accepts Holemaker Cutters, No. 3 Morse Taper Drill Bits, Tapping Head & Reamers.Two speed gearbox with electronic variable speed motor, soft start, and jog reverse function, making this machine ideal for tapping. 75mm diameter x 75mm depth Holemaker Cutter Capacity.

Side mounted coolant system. Optional 1L pressure feed coolant bottle available. The Holemaker MAX 3X3 is also available with a swivel base system fitted, which allows 30 of movement left and right, and 15mm back and forward.

Versatility is the hallmark of this machine. Holes up to 52mm diameter by 52mm depth can be produced quickly and efficiently using Holemaker cutters, and with the No. 2 Morse Taper it is just at home with a Drill Chuck and Arbor or Taper Shank Drills and Reamers up to 23mm.

Featuring a Heavy Duty 2 speed gear box and side mounted coolant system. This machine is perfectly suited to engineering workshops and maintenance facilities, where its versatility is most valuable.